Sawdust granulator complete production line

 

ABC Machinery can provide a full set of wood pellet plant and production equipment, including the screening of raw materials, transport, grinding, drying, mixing, granulation, cooling, dust removal, packaging and other links, easy to operate, stable performance, easy maintenance. The whole line has a high degree of automation, the feeding amount of raw materials does not need manual control, pulverizer, dryer, gemco pellet mill and so on adopt frequency modulation feeding, the finished product is automatically weighed. The production line adopts imported noise reduction equipment and pulse dust removal system with noise volume less than 80 dB and dust degree less than 50mg/m3.

First of all, the production of pto driven pellet mill depends on what kind of raw materials are in your hand. If you take sawdust and shavings as raw materials, the size must be able to pass through the screen hole of about 8mm-12mm. If the branches and some waste boards in your hand must have been crushed or even need to be sliced to improve the production capacity. We require 10% to 16% water, and no more than 2 to 4% water. If the water is too much, we will need to equip you with drying equipment. If the water is too small, it is necessary to mix wood chips with relatively high water content in proportion to appropriate water content.

To sum up, the configuration of sawdust production line can be divided into slicing section, drying moisture pretreatment section, mixing buffer section, particle section, packaging section and the supporting electrical control system, dust treatment system, transport system, temperature control system and other major projects. In the granulator main machine, we use the circular mold granulator, called circular mold granulator, which is composed of vertical circular mold and internal drum, pressure on the circular mold (circular mold).The material in the delivery system enters the center of the particle chamber through a vane propeller. In the pellet chamber, the drum (press roller and spindle) is stationary, and the die (ring die) is moving, similar to the washing machine. The raw material is first passed through a rotating mold and then extruded by a roller. Circular mould sawdust particle machine will not appear the cylinder is not uniform, and because the distance between inside and outside is equal, will not appear wear. It is more suitable for mass production. For one thing, the loss value of roller and mold is relatively low. Second, it is more energy efficient. Due to the extra friction caused by the roller sliding, the flat mold granulator needs to consume more energy. However, the additional friction does not have only negative effects, because friction generates heat, which is beneficial for particle production. But too much heat reduces productivity, so we increase the temperature control system to keep the temperature in the particle room constant. ABC Machinery sales of wood pelletizer, biomass granule machine accessories such as sawdust granule machine.