How to solve the abnormal situation of the noodle machine

 In the wheat processing plant, we cannot do without the use of the beating machine, which is prone to some small problems in the long-term work. At this time, we need to have a new understanding of the failure of the beating machine. We can identify where the fault occurs at the first time, and what is the reason for the failure? How should we solve this problem? These problems are familiar with, so that we can face in the emergence of problems can be the first time to solve, to ensure the production time and efficiency of the face machine! ABC Machinery professional manufacturer of flour to talk about flour milling process machine abnormal conditions should be solved?

 

If there is an abnormal condition in the operation of the noodle machine, the power must be cut off first, and the fault can only be checked after the power is cut off, which is also a safety measure for maintenance personnel. If the machine does not operate after being powered on, the possible fault is: the power supply contact is bad or the plug is loose; Bad contact of power switch; Poor contact of microswitch; The thermal protector is out of order. Troubleshooting measures are: replace the connector or repair the power supply, check whether the switch is damaged, adjust the micro switch, replace the heat protector. After the motor does not turn, it will also produce vibration or slow speed. The fault situation is: the mechanical part is stuck; The centrifuge is not on. Too low voltage can also cause this situation, the way to remove the trouble is to clean up the foreign matter in the crushing tank, after starting the machine, idle for half a minute, then slowly feed and adjust the power supply voltage.

Correct understanding of all kinds of abnormalities, is the face machine users friends should pay attention to the problem! I hope you can use the maize flour machine in the process of smooth!

 

Cold pressing and hot pressing of screw oil press

Now customers will ask whether our crops need to be fried or not? In fact, it is the difference between cold pressing and hot pressing of crops. Some crops can be steamed and fried, some crops do not need to be fried, depending on the situation! The following is the difference between cold pressing and hot pressing:
The so-called hot pressing means that the peanuts are fried in a wok and then pressed with an small scale oil mill. Cold pressing means that the peanuts are pressed directly without being fried!

Hot pressing is to squeeze the seeds of oil crops after roasting, with special fragrance, darker color and higher yield. There is less residue in the product and it is easy to store. The cold-pressed seeds are not roasted, so the smell is poor, but the color is good. Cold pressing does not need to heat the oil, the oil yield is low, the crude oil is light in color, has less impurities, and can retain more nutrients in the oil. It is suitable for some small varieties of oils or high-grade health oils that are not suitable for heating. Hot pressing requires heating oil (steaming and frying), and the oil yield is high, which is currently a common method. Therefore, hot pressing and cold pressing do not matter whether it is good or bad, it just depends on the needs of customers, but some crops must be hot pressed, such as sesame and tea seeds; some crops must be cold pressed, such as oil sunflower (also melon seeds). Generally, it is hot pressed once and cold pressed twice. This way the oil output rate is relatively high! The specific need for hot pressing or cold pressing depends on the oil crops to be pressed and the habits of customers.
After deciding how to squeeze, you can select the corresponding type of peanut oil processing equipment.

ABC Machinery is a professional oil equipment manufacturer, providing oil presses, complete production lines, oil mill project, palm oil processing plant and other kinds of grease equipment.

Rear axle rod making machine

 

Brief introduction charcoal briquettes machine:

After the removal of shaft rod making machine is also known as the shaft after the charcoal machine, propeller design is unique, can be adjusted before and after the rod speed and density, whether it is shavings, bamboo or a variety of wooden chaff, propeller stirring can be automatically uniform blanking, equipped with 22 kilowatt motor, strong power yield is higher (when the production of 280-350 kg).

The performance characteristics of bagasse briquettes machine

ABC Machinery new high-speed rice husk briquette machine dismantling propeller repair, do not need to remove the molding cylinder and heater, the repair of the propeller directly from the middle of the belt pulley installation immediately boot direct production.

Remind: after disassembling after drawing, after adjusting, before disassembling these 3 kinds of models each have their merits, hope everybody chooses according to own demand.

Charcoal machine production of charcoal density, density, good flammability, can replace firewood and coal. This product is especially suitable for heating kang in autumn and winter in north China, heating greenhouses or making common life fuel.