What are the raw materials that can be used in the wood pellet machine?

 Sawdust pellet machine may not be unfamiliar to everyone. The so-called wood pellet machine is used to make wood chips, etc. into biomass fuel pellets, which can be used as fuel. The production raw materials of the wood pellet machine are some waste materials in daily life, and the reuse of resources is realized through processing. But for the wood pellet machine, not all production waste can produce pellets. Here is an introduction to the raw material sources and requirements of the wood pellet machine to help you better use the poultry feed making machine.

Crop residues: The crop residues include cotton stalks, wheat straw, rice straw, corn stalks, corn cobs, and other grain stalks. The so-called "crop residues" can be used as raw materials for energy production, but also have other uses. For example, corncobs can be used as the main raw material for the production of chemical products such as xylitol and furfural; corn stalks, wheat oranges, cotton stalks Various straws can be processed and mixed with resin to make fiber boards; straws can also be directly returned to the field as fertilizer.
2. Sawdust under the band saw: The sawdust under the band saw has the best granularity, the production of particles is stable, the particles are smooth, the hardness is high, and the energy consumption is small.
3. Small shavings in furniture factories: Because the particles are relatively large, it is not easy to enter the wood pellet machine, so it is easy to block, so the shavings need to be crushed before use.

4. Sand powder in board factories and furniture factories: Sand powder has a lighter specific gravity, it is not easy to enter the wood pellet machine, and is easy to block. It is recommended to mix wood chips together to pellet, and the ratio can be about 50% to achieve the best effect.
5. Wooden board and wood chip trim: The wood board and wood chip trim must be crushed before use.
6. Fibrous materials: For fibrous materials, the length of the fiber should be controlled. Generally, the length should not exceed 5mm.
The use of wood pellet machine not only solves the problem of waste storage, but also brings new benefits. However, the feed pellet mill has requirements for raw materials, and only by meeting these raw material requirements can better pellets be produced.