Recently, many customers who have bought spiral oil press say that the oil output of the soybean oil machine is not smooth in the operation. Today, our ABC Machinery oil press factory technical chief engineer to communicate with you: what are the reasons for the poor oil out of the screw press in oil mill business?
1. The oil seam of the pressing strip is blocked by oil residue and debris or the pressing strip is packed too tightly. We should remove the oil residue and check whether the strip is too tight. If the strip is too tight, it should be adjusted.
2. If there is oil storage in the hopper of the cooking oil making machine, we should stop feeding at this time, and then use the oil cake to slowly flush out the oil. After the oil rushes out, we can continue to operate; We can also stop the oil from the discharge port, reassemble the pressing chamber parts, after the adjustment is completed, and then start the press.
3. We should pay special attention to oil crops with high oil content. If the cake is too thin when pressing, the oil can not be discharged from the seam in time, so that it will be stored in the chamber and hopper. At this time, the operation should be carried out by pressing oil seeds with high oil content, and the cake should be thicker, or thinner.
Since the introduction of the rod making machine, it has undoubtedly had a great impact on the entire market. However, due to various reasons, there are still big problems. So where will the sawdust briquettes making machine develop in the future?
1: Nowadays, most rod making machines still need manual operation. Perhaps with the development of technology, I believe that there will be fully automatic rod making machines without manual operation soon. 2: The output of rod making machine has improved. At present, the highest output of rod making machine rarely exceeds 10T/H. If matched with the production line, it can produce dozens of tons per hour at most. Many customers who require large output need to order several the set of rod making machines (units) can meet the demand for seats, but this answer greatly increases the floor space and invisibly increases a large part of the production cost. The breakthrough in output is the only way for the future development of the sawdust briquette maker. 3: The function of the stick making machine is diversified. Simply put, it is a machine with multiple functions. Although the stick making machine can also suppress crops such as straw and peanut shells at present, the sawdust, etc. still need to be pressed by a special sawdust stick making machine. In the future, there will be a real multifunctional stick making machine, which will integrate the pressing functions of feed, organic fertilizer and biomass pellets, and truly realize one machine with multiple functions. 4: With the improvement of the degree of particle forming, the rods pressed by the current rod making machines on the market often have cracks, uneven surfaces, etc., and in severe cases, powders may even be pressed. These are still unavoidable according to the current technical level. But it is believed that the forming aspect of the biomass briquettes machine will be greatly improved in the future.
ABC Machinery specializes in the production of sawdust rod making machines and biomass rod making machines. For more products login: www.bioenergy-machine.com.
