When the production line of the sawdust briquette press is working, because multiple machines are produced at the same time, the feeding and discharging are automatically completed by the conveyor, which greatly reduces the human resources. As long as each rod making machine can be stably produced, it should not pursue the maximum output of a single machine. Let the machine run at full load, because the sugarcane bagasse charcoal machine is more sensitive to the moisture content of the material and the crushing particle size requirements under full load. If there is a certain difference from the normal requirements, the discharge molding will be unstable, resulting in manual labor. The adjustment increases the labor intensity of the control personnel, and the production of other machines will also be affected to a certain extent! Therefore, the load of each host machine in the straw briquetting plant should be controlled within the rated load, to avoid the occurrence of unstable machine production caused by full load or overload operation, in order to improve the production efficiency of the entire biomass briquette plant.
The mechanism charcoal equipment has certain requirements on the raw material itself and the moisture content of the raw material. The raw material has a high lignin content, and the carbon content of the produced charcoal is high. In addition, the rod making machine generally requires that the moisture of the raw material is between 5% and 12%. If the moisture is high, it needs to be dried first.
Machine charcoal equipment generally uses sawdust or rice husks as raw materials, neither of which needs to be crushed. Secondly, wood shavings, bamboo shavings, branches, wooden scraps, fruit shells, etc. are also good raw materials, but they need to be crushed first, and the requirements for the crusher are also relatively high.
No comments:
Post a Comment