Feed granulator other parts maintenance common sense

We in these parts of the feed pellet machine down time must be very careful, don't make a scratch in the surface of the parts, if accidentally scratched out for, working in this part will appear different ring, serious will stop work, in addition to remove when we should pay attention to these problems, we in the assembly when the poultry feed plant also want more attention, the first when we in the assembly of mechanical gears, we want to see the machinery crankshaft is very clean, if not clean.

We need to use a soft cloth or a new towel to get rid of the oil, together with the impurities, then from the new on the crankshaft, coated with a layer of oil, so that it can ensure the crankshaft rotating at did not produce any interference phenomenon, when there is a time when we are in the installation of the gear, we must watch the occlusal direction of gear, we must follow the direction of occlusion of the gear is installed, if we don't have in the direction of the occlusion of the gear to install, and may at the time of this cattle feed business machine rotation, the phenomenon of the gear fracture. When we install the gears, in addition to these directions to be clear, the more important thing is to look at the density of these gears, the density of these gears will change with the tightness of our screws. Only we carefully install our animal feed production will not be hurt!

Our company is a well-known poultry feed machine supplier, the company for many years has always adhered to the "to the customer's needs to produce, to customer's requirements as a service, and constantly to the development of science and technology, management and efficiency" business philosophy. For the general customer service, we sincerely hope that the company's products can improve your enterprise production efficiency, save costs, enhance the market competitiveness. At the same time, I hope you can put forward more valuable opinions and Suggestions in the process of using our products.

The role of the pressure roller in the pressure roller granulator

The correct use of the pressure roller is one of the most critical factors affecting the use of the cattle feed manufacturing business pellet machine. In our long-term production and service, we found that many ring dies have uneven working surface, low hole rate, reduced production capacity, and the new ring die poultry feed making machine  cannot produce material. Most of the reasons are Because of the irregular use of the pressure roller.

When using the ring die poultry feed plant, the characteristics of the new ring die are: the working surface is flat, but the smoothness in the eyeholes and the guide openings do not reach the smoothness required for normal granulation, and the eyelets of the new ring die have resistance to the material. And the friction is relatively large (especially the small aperture ring die), and the two ends of the old roll shell are more severely worn, and the material easily slips into the pressure relief groove from the wear on both ends of the roll shell, causing the new ring die to discharge Smooth or no discharge. Therefore, the new ring die must be equipped with a new roller shell. Ensure that it is used for more than 100 hours to ensure that the working surface of the new ring die is evenly compressed, and that the perforation rate and polishing rate meet the requirements. In order to give full play to the best performance of the ring die. In principle, each ring die must be equipped with a pair of pressure rollers when it is first used, and the same pair of roller shells cannot be used with other ring die strings.

The smallest small flour mill is a three - phase electric flour mill

ABC Machinery Small flour machine the smallest is three - phase electric flour machine! Small flour mill has been a demand for very large flour machine, many small household wheat milling process machine customer consulting domestic flour machine, two have a lot of customers is to 220 v electric flour mill, here to tell you: our ABC Machinery flour mill cost is three-phase electric flour mill, output the smallest flour machine is each hour 100 catties of automatic stone mill flour machine and semi-automatic stone mill flour machine, this kind of stone mill flour machine is grinding flour is does not destroy nutrients in wheat materials, keep stay green flour and very popular with today's pursuit of healthy people! Another kind of small flour mill is the steel mill flour machine, this kind of steel mill flour machine is divided into two models, one is the 40 model of 500-800 pounds per hour, the other is the 50 model of 800-1000 pounds per hour! So when you buy small flour machine can refer to the above provided content, strive to buy the most suitable for their own good and inexpensive flour machine!

 

ABC Machinery to teach you how to open an oil mill steps and proceeds

If you want to open an oil mill business, how much output of oil mill equipment do you need? Because, if you need large equipment, then buy a complete set of mustard oil plant, so you need to communicate with the manufacturer, find professional engineers to solve your problems, with professional matching equipment.
There are mainly four machines in the oil press workshop, one is the sheller, the other is the seed frying machine (wok), the third is the oil press and the fourth is the oil filter. But one and two are optional equipment, three and four are necessary equipment, of course, can also be combined into a machine, that is the combined machine (press rate all-in-one machine).Open an oil mill, need to do what preparation?

First, study the market, understand the market conditions, so that more reasonable sales products.
Second, understand each manufacturer's soybean oil machine model and quality, ABC Machinery machine quality and credibility are guaranteed, welcome customers to come to consult and order.

Third, the estimated cost, the general medium coconut oil processing machine, the cost of about 20,000, the general supporting facilities have wok and feeding machine, these are customers can match can not match the equipment, see customer needs!
Fourth, estimate the location and size of the facade. Geographical location is chosen in farmer's market or fair commonly, appearance is left and right sides 20 square metre commonly.

Fifth, the approval of relevant documents and three-phase electricity.
Sixth, there will be some problems or problems at the beginning, please feel free to call us at any time ABC Machinery mill, we are happy to help you solve.
Seventh, basically on the right track, customers can rest assured production, processing and sales, later can also consider increasing the scale.

Daily inspection of corn processing equipment

 

Every day must do the inspection work to the corn flour milling process equipment! Any mechanical equipment in the daily operation should pay attention to the equipment repair and maintenance work, daily detection is very important for the machine, maize processing equipment is not exceptional also, daily to detect before operation, not only can avoid the happening of some malfunction but also can prolong the service life of mechanical, as much as possible so as to ensure that our corn flour mill plant, production time, to strive for more economic benefits! So be sure to do daily check!

Specific testing of corn processing equipment:

1. Inspection of its key facilities.

2. Testing the status of maize milling process machinery.

3. Conduct subjective state monitoring when the corn processing machinery is shut down.

4. Regularly carry out large-scale testing and maintenance, that is, regularly replace parts of corn deep-processing machinery or carry out repairs.

5. Check the transmission parts, safety protection parts, supporting points and power connection parts of mechanical equipment to ensure the normal operation of mechanical equipment.

 

Secondly, in the process of use, it is necessary to timely clean up the corn processing equipment and sundries at the operation site to prevent the safety hidden dangers caused by flour mill project machinery and sundries at the site. In order to strengthen the on-site preventive work, if necessary, protective barriers or safety warning signs should be installed around the work site to prohibit non-working personnel from entering the work site. The work site should be unobblocked and equipped with necessary protective equipment and facilities. It is necessary to do a good job in daily testing, so as to avoid a series of mechanical failures in the operation process of the equipment, so as to improve its production efficiency, but also to ensure the personal safety of operators!

What is the reason for the uneven output of the feed pellet machine?

The feed pellet machine is currently the most widely used livestock feed manufacturing machine. Because the products it manufactures are easy to store, transport and feed, it is loved by the majority of farmers. However, the feed pellet machine sometimes occurs during use, such as the pellets containing more powder, the size of the pellets produced is not uniform, and the pelleting machinery does not discharge these common problems. Farmers or feed processing plants should understand some simple failure causes in the daily use of machinery, and be able to take corresponding measures to remedy them in time.

1. There is a problem with the blade and gear of the poultry feed production machine. The formation of feed pellets mainly relies on the rotation of the pellet machine gear to drive the blades to cut pellets. Once the gears or blades are eliminated, the size of the cut feed particles will be uneven.

2. There is a problem with the motor. The motor equipped with the poultry feed making machine is a motor that is compatible with its rated power. Once it is damaged in the working process or the working power is unstable, it will not be able to pelletize or the pelleting will be uneven.

3. Operational problems. Irregular operation of operators will also cause uneven pellets in cattle feed manufacturing plant. For example, the granulation powder contains a large amount of water, which prevents the feed pellets from being formed, or they are easy to crack when exposed to cold wind after forming. If this situation is encountered, the operator should calmly analyze, find out the cause, and make timely remedies. So as not to affect the pelleting output and cause corresponding economic losses.

How to solve the abnormal situation of the noodle machine

 In the wheat processing plant, we cannot do without the use of the beating machine, which is prone to some small problems in the long-term work. At this time, we need to have a new understanding of the failure of the beating machine. We can identify where the fault occurs at the first time, and what is the reason for the failure? How should we solve this problem? These problems are familiar with, so that we can face in the emergence of problems can be the first time to solve, to ensure the production time and efficiency of the face machine! ABC Machinery professional manufacturer of flour to talk about flour milling process machine abnormal conditions should be solved?

 

If there is an abnormal condition in the operation of the noodle machine, the power must be cut off first, and the fault can only be checked after the power is cut off, which is also a safety measure for maintenance personnel. If the machine does not operate after being powered on, the possible fault is: the power supply contact is bad or the plug is loose; Bad contact of power switch; Poor contact of microswitch; The thermal protector is out of order. Troubleshooting measures are: replace the connector or repair the power supply, check whether the switch is damaged, adjust the micro switch, replace the heat protector. After the motor does not turn, it will also produce vibration or slow speed. The fault situation is: the mechanical part is stuck; The centrifuge is not on. Too low voltage can also cause this situation, the way to remove the trouble is to clean up the foreign matter in the crushing tank, after starting the machine, idle for half a minute, then slowly feed and adjust the power supply voltage.

Correct understanding of all kinds of abnormalities, is the face machine users friends should pay attention to the problem! I hope you can use the maize flour machine in the process of smooth!