How is the production efficiency of the biomass briquette plant affected?

When the production line of the sawdust briquette press is working, because multiple machines are produced at the same time, the feeding and discharging are automatically completed by the conveyor, which greatly reduces the human resources. As long as each rod making machine can be stably produced, it should not pursue the maximum output of a single machine. Let the machine run at full load, because the sugarcane bagasse charcoal machine is more sensitive to the moisture content of the material and the crushing particle size requirements under full load. If there is a certain difference from the normal requirements, the discharge molding will be unstable, resulting in manual labor. The adjustment increases the labor intensity of the control personnel, and the production of other machines will also be affected to a certain extent! Therefore, the load of each host machine in the straw briquetting plant should be controlled within the rated load, to avoid the occurrence of unstable machine production caused by full load or overload operation, in order to improve the production efficiency of the entire biomass briquette plant.

The mechanism charcoal equipment has certain requirements on the raw material itself and the moisture content of the raw material. The raw material has a high lignin content, and the carbon content of the produced charcoal is high. In addition, the rod making machine generally requires that the moisture of the raw material is between 5% and 12%. If the moisture is high, it needs to be dried first.

Machine charcoal equipment generally uses sawdust or rice husks as raw materials, neither of which needs to be crushed. Secondly, wood shavings, bamboo shavings, branches, wooden scraps, fruit shells, etc. are also good raw materials, but they need to be crushed first, and the requirements for the crusher are also relatively high.

Factors affecting the service life of straw pellet machine

ABC Machinery is mainly engaged in high-quality straw pellet machine, wood pellet plant and other equipment(rotary drum dryer, pellet packing machine). The wood pellet making machine is made of crop straw or sawdust as raw materials, and is pressed into cylindrical pellets by the straw pellet machine.

Factors affecting the life of gemco pellet mill
1. The moisture of the material is too low, the hardness of the processed object is high, and the power consumption during processing is large, which increases the production cost of the enterprise and reduces the service life of the straw pellet machine. If the moisture is too large, it is not easy to crush and increases the impact of the hammer The number of times, at the same time, heat is generated due to the friction of the material and the impact of the hammer, which evaporates the internal moisture of the processing object, the evaporated moisture and the crushed fine powder form a paste and block the sieve, which reduces the discharge of the crusher. The moisture of grains, corn, etc. is controlled below 14%.

2. A permanent magnet cylinder or iron remover can be installed at the feed inlet of the machine, so as not to affect the service life of the pressure wheel, mold and central shaft. The temperature of the straw particles during the extrusion process is as high as 50-85°C, and the pressure wheel is running it is under strong driving force during work, but lacks the necessary and effective dust protection device, so the bearings must be cleaned every 2-5 working days, and high temperature grease must be added. The main shaft of the commercial wood pellet mill every other month after cleaning and refueling, the gear box should be cleaned and maintained at intervals of half a year, and the screw tightening and replacement of the transmission part should be carried out at any time.

3. When the material pressing is about to end, mix a little wheat hull with edible oil and put it into the machine. After 1-2 minutes of pressing, the machine is shut down to fill the mold hole with oil so that it can be put into production next time. It also saves man-hours. After the straw pellet machine stops, loosen the pressure wheel adjustment screw and remove the residual material.

The above three factors are the main factors affecting the service life of the straw pellet machine. On the other hand, the use of straw pellet machine is gradually expanding.

The difference between small sawdust granulator and feed granulator

Small sawdust particles machine is a lot of use in more than a decade ago, at that time the main is to use a new type of animal feed mill, because at that time many do feed manufacturers need to feed and then crushed granules, on the one hand, convenient to store, on the other hand feed particles are small and convenient, is advantageous to the animal digestion and absorption, is very popular with breeding users. So at that time the feed pellet machine is very popular, the sale is very popular and thus spawned a large number of feed pellet machine manufacturers.

In recent years, with the promotion of low-carbon and environmental protection in China, more and more places have begun to give up traditional coal as the raw material for combustion, and use sawdust or straw particles as the raw material for new energy. The demand for sawdust particles is most prominent in large power plants. On current trends, supply still outstrips supply. Under this environment, the sale of small sawdust granulator also once popular, in order to have better income, there are many traditional pellet feed mill manufacturers, give up the basic line of responsibility, feed granulator sold to the user to suppress sawdust particles. However, sawdust particles are much lighter than feed particles, more difficult to press than feed particles, so the traditional poultry feed production process machine is very difficult to suppress sawdust particles, and because of the market needs of the pressure, high wear, the service life of the machine is also very short.

We also remind everyone here, when buying chicken feed production machine, must be clear about small sawdust granulator, or feed granulator. Avoid losing money. Choose Anyang GEMCO sawdust granulator, sawdust granulator, sawdust crusher is not wrong, both energy saving and environmental protection, our company guarantees the quality of production, will provide you with the most satisfactory service!