What are the raw materials that can be used in the wood pellet machine?

 Sawdust pellet machine may not be unfamiliar to everyone. The so-called wood pellet machine is used to make wood chips, etc. into biomass fuel pellets, which can be used as fuel. The production raw materials of the wood pellet machine are some waste materials in daily life, and the reuse of resources is realized through processing. But for the wood pellet machine, not all production waste can produce pellets. Here is an introduction to the raw material sources and requirements of the wood pellet machine to help you better use the poultry feed making machine.

Crop residues: The crop residues include cotton stalks, wheat straw, rice straw, corn stalks, corn cobs, and other grain stalks. The so-called "crop residues" can be used as raw materials for energy production, but also have other uses. For example, corncobs can be used as the main raw material for the production of chemical products such as xylitol and furfural; corn stalks, wheat oranges, cotton stalks Various straws can be processed and mixed with resin to make fiber boards; straws can also be directly returned to the field as fertilizer.
2. Sawdust under the band saw: The sawdust under the band saw has the best granularity, the production of particles is stable, the particles are smooth, the hardness is high, and the energy consumption is small.
3. Small shavings in furniture factories: Because the particles are relatively large, it is not easy to enter the wood pellet machine, so it is easy to block, so the shavings need to be crushed before use.

4. Sand powder in board factories and furniture factories: Sand powder has a lighter specific gravity, it is not easy to enter the wood pellet machine, and is easy to block. It is recommended to mix wood chips together to pellet, and the ratio can be about 50% to achieve the best effect.
5. Wooden board and wood chip trim: The wood board and wood chip trim must be crushed before use.
6. Fibrous materials: For fibrous materials, the length of the fiber should be controlled. Generally, the length should not exceed 5mm.
The use of wood pellet machine not only solves the problem of waste storage, but also brings new benefits. However, the feed pellet mill has requirements for raw materials, and only by meeting these raw material requirements can better pellets be produced.

Check the quality of feed pellet machine

 ABC Machinery Feed Pellet Machine is through the layers of checks, and the product quality, service quality, and brand activities are linked together to avoid the trouble of maintenance door as much as possible. It can quickly open up new markets and seek progress while maintaining stability. Continue to become a key enterprise in China's animal feed business pellet machine industry in 2015, creating new achievements.

ABC Machinery feed pellet machine quality is the first level, technical breakthroughs push new products, consolidate the quality of its own products. The production manager of ABC Machinery poultry feed plant always believes that the most effective and practical way to ensure product quality is to keep feed pellet machines as few as possible on the consumer side or to avoid incidents like maintenance door disputes. The most effective and practical way is to continuously improve the pellet machine. Production technology, overcome technical difficulties, introduce new products, and ensure the quality of pellet machines from the production link and the factory maintenance link. The perfect combination of product design and product quality and safety is the first mystery that ABC Machinery feed pellet machine quality can quickly emerge from maintenance disputes.
 

ABC Machinery feed pellet machine quality is the second level, to improve brand service quality, and continue to care for customers. The sales and customer service quality of ABC Machinery poultry feed machine is not just a slogan, it is a practical action one by one. How to help customers improve their competitiveness has become an important task of ABC Machinery feed pellet machine. From quality assurance to after-sales maintenance, "Only one brand of machine is used in a lifetime, and professionals can maintain it no matter where it is operated." Professional services and caring covering the entire life cycle of the equipment are the trust of ABC Machinery feed pellet machines. Key elements.

When customers choose a animal feed production pellet machine, the staff of the company will help the customer choose the most suitable high-quality equipment according to the actual situation. At the same time, during the entire life cycle of the equipment, the service staff of ABC Machinery feed pellet machine will provide customers with the best quality Service to ensure the long-term and healthy operation of the equipment, maximize the value of the product, and let customers fully feel the professionalism and distinctiveness of the ABC Machinery feed pellet machine brand, so that the possibility of maintenance and disputes with customers can be reduced to zero.
 

ABC Machinery feed pellet machine quality third level, to enhance the brand interactive exposure, multi-party quality guidance. ABC Machinery cattle feed plant pays more attention to the market recognition of product quality in market promotion, and emphasizes the active participation of consumers and quality feedback in market activities.

Feed granulator other parts maintenance common sense

We in these parts of the feed pellet machine down time must be very careful, don't make a scratch in the surface of the parts, if accidentally scratched out for, working in this part will appear different ring, serious will stop work, in addition to remove when we should pay attention to these problems, we in the assembly when the poultry feed plant also want more attention, the first when we in the assembly of mechanical gears, we want to see the machinery crankshaft is very clean, if not clean.

We need to use a soft cloth or a new towel to get rid of the oil, together with the impurities, then from the new on the crankshaft, coated with a layer of oil, so that it can ensure the crankshaft rotating at did not produce any interference phenomenon, when there is a time when we are in the installation of the gear, we must watch the occlusal direction of gear, we must follow the direction of occlusion of the gear is installed, if we don't have in the direction of the occlusion of the gear to install, and may at the time of this cattle feed business machine rotation, the phenomenon of the gear fracture. When we install the gears, in addition to these directions to be clear, the more important thing is to look at the density of these gears, the density of these gears will change with the tightness of our screws. Only we carefully install our animal feed production will not be hurt!

Our company is a well-known poultry feed machine supplier, the company for many years has always adhered to the "to the customer's needs to produce, to customer's requirements as a service, and constantly to the development of science and technology, management and efficiency" business philosophy. For the general customer service, we sincerely hope that the company's products can improve your enterprise production efficiency, save costs, enhance the market competitiveness. At the same time, I hope you can put forward more valuable opinions and Suggestions in the process of using our products.

The role of the pressure roller in the pressure roller granulator

The correct use of the pressure roller is one of the most critical factors affecting the use of the cattle feed manufacturing business pellet machine. In our long-term production and service, we found that many ring dies have uneven working surface, low hole rate, reduced production capacity, and the new ring die poultry feed making machine  cannot produce material. Most of the reasons are Because of the irregular use of the pressure roller.

When using the ring die poultry feed plant, the characteristics of the new ring die are: the working surface is flat, but the smoothness in the eyeholes and the guide openings do not reach the smoothness required for normal granulation, and the eyelets of the new ring die have resistance to the material. And the friction is relatively large (especially the small aperture ring die), and the two ends of the old roll shell are more severely worn, and the material easily slips into the pressure relief groove from the wear on both ends of the roll shell, causing the new ring die to discharge Smooth or no discharge. Therefore, the new ring die must be equipped with a new roller shell. Ensure that it is used for more than 100 hours to ensure that the working surface of the new ring die is evenly compressed, and that the perforation rate and polishing rate meet the requirements. In order to give full play to the best performance of the ring die. In principle, each ring die must be equipped with a pair of pressure rollers when it is first used, and the same pair of roller shells cannot be used with other ring die strings.

The smallest small flour mill is a three - phase electric flour mill

ABC Machinery Small flour machine the smallest is three - phase electric flour machine! Small flour mill has been a demand for very large flour machine, many small household wheat milling process machine customer consulting domestic flour machine, two have a lot of customers is to 220 v electric flour mill, here to tell you: our ABC Machinery flour mill cost is three-phase electric flour mill, output the smallest flour machine is each hour 100 catties of automatic stone mill flour machine and semi-automatic stone mill flour machine, this kind of stone mill flour machine is grinding flour is does not destroy nutrients in wheat materials, keep stay green flour and very popular with today's pursuit of healthy people! Another kind of small flour mill is the steel mill flour machine, this kind of steel mill flour machine is divided into two models, one is the 40 model of 500-800 pounds per hour, the other is the 50 model of 800-1000 pounds per hour! So when you buy small flour machine can refer to the above provided content, strive to buy the most suitable for their own good and inexpensive flour machine!

 

ABC Machinery to teach you how to open an oil mill steps and proceeds

If you want to open an oil mill business, how much output of oil mill equipment do you need? Because, if you need large equipment, then buy a complete set of mustard oil plant, so you need to communicate with the manufacturer, find professional engineers to solve your problems, with professional matching equipment.
There are mainly four machines in the oil press workshop, one is the sheller, the other is the seed frying machine (wok), the third is the oil press and the fourth is the oil filter. But one and two are optional equipment, three and four are necessary equipment, of course, can also be combined into a machine, that is the combined machine (press rate all-in-one machine).Open an oil mill, need to do what preparation?

First, study the market, understand the market conditions, so that more reasonable sales products.
Second, understand each manufacturer's soybean oil machine model and quality, ABC Machinery machine quality and credibility are guaranteed, welcome customers to come to consult and order.

Third, the estimated cost, the general medium coconut oil processing machine, the cost of about 20,000, the general supporting facilities have wok and feeding machine, these are customers can match can not match the equipment, see customer needs!
Fourth, estimate the location and size of the facade. Geographical location is chosen in farmer's market or fair commonly, appearance is left and right sides 20 square metre commonly.

Fifth, the approval of relevant documents and three-phase electricity.
Sixth, there will be some problems or problems at the beginning, please feel free to call us at any time ABC Machinery mill, we are happy to help you solve.
Seventh, basically on the right track, customers can rest assured production, processing and sales, later can also consider increasing the scale.

Daily inspection of corn processing equipment

 

Every day must do the inspection work to the corn flour milling process equipment! Any mechanical equipment in the daily operation should pay attention to the equipment repair and maintenance work, daily detection is very important for the machine, maize processing equipment is not exceptional also, daily to detect before operation, not only can avoid the happening of some malfunction but also can prolong the service life of mechanical, as much as possible so as to ensure that our corn flour mill plant, production time, to strive for more economic benefits! So be sure to do daily check!

Specific testing of corn processing equipment:

1. Inspection of its key facilities.

2. Testing the status of maize milling process machinery.

3. Conduct subjective state monitoring when the corn processing machinery is shut down.

4. Regularly carry out large-scale testing and maintenance, that is, regularly replace parts of corn deep-processing machinery or carry out repairs.

5. Check the transmission parts, safety protection parts, supporting points and power connection parts of mechanical equipment to ensure the normal operation of mechanical equipment.

 

Secondly, in the process of use, it is necessary to timely clean up the corn processing equipment and sundries at the operation site to prevent the safety hidden dangers caused by flour mill project machinery and sundries at the site. In order to strengthen the on-site preventive work, if necessary, protective barriers or safety warning signs should be installed around the work site to prohibit non-working personnel from entering the work site. The work site should be unobblocked and equipped with necessary protective equipment and facilities. It is necessary to do a good job in daily testing, so as to avoid a series of mechanical failures in the operation process of the equipment, so as to improve its production efficiency, but also to ensure the personal safety of operators!