ABC Machinery to teach you how to open an oil mill steps and proceeds

If you want to open an oil mill business, how much output of oil mill equipment do you need? Because, if you need large equipment, then buy a complete set of mustard oil plant, so you need to communicate with the manufacturer, find professional engineers to solve your problems, with professional matching equipment.
There are mainly four machines in the oil press workshop, one is the sheller, the other is the seed frying machine (wok), the third is the oil press and the fourth is the oil filter. But one and two are optional equipment, three and four are necessary equipment, of course, can also be combined into a machine, that is the combined machine (press rate all-in-one machine).Open an oil mill, need to do what preparation?

First, study the market, understand the market conditions, so that more reasonable sales products.
Second, understand each manufacturer's soybean oil machine model and quality, ABC Machinery machine quality and credibility are guaranteed, welcome customers to come to consult and order.

Third, the estimated cost, the general medium coconut oil processing machine, the cost of about 20,000, the general supporting facilities have wok and feeding machine, these are customers can match can not match the equipment, see customer needs!
Fourth, estimate the location and size of the facade. Geographical location is chosen in farmer's market or fair commonly, appearance is left and right sides 20 square metre commonly.

Fifth, the approval of relevant documents and three-phase electricity.
Sixth, there will be some problems or problems at the beginning, please feel free to call us at any time ABC Machinery mill, we are happy to help you solve.
Seventh, basically on the right track, customers can rest assured production, processing and sales, later can also consider increasing the scale.

Daily inspection of corn processing equipment

 

Every day must do the inspection work to the corn flour milling process equipment! Any mechanical equipment in the daily operation should pay attention to the equipment repair and maintenance work, daily detection is very important for the machine, maize processing equipment is not exceptional also, daily to detect before operation, not only can avoid the happening of some malfunction but also can prolong the service life of mechanical, as much as possible so as to ensure that our corn flour mill plant, production time, to strive for more economic benefits! So be sure to do daily check!

Specific testing of corn processing equipment:

1. Inspection of its key facilities.

2. Testing the status of maize milling process machinery.

3. Conduct subjective state monitoring when the corn processing machinery is shut down.

4. Regularly carry out large-scale testing and maintenance, that is, regularly replace parts of corn deep-processing machinery or carry out repairs.

5. Check the transmission parts, safety protection parts, supporting points and power connection parts of mechanical equipment to ensure the normal operation of mechanical equipment.

 

Secondly, in the process of use, it is necessary to timely clean up the corn processing equipment and sundries at the operation site to prevent the safety hidden dangers caused by flour mill project machinery and sundries at the site. In order to strengthen the on-site preventive work, if necessary, protective barriers or safety warning signs should be installed around the work site to prohibit non-working personnel from entering the work site. The work site should be unobblocked and equipped with necessary protective equipment and facilities. It is necessary to do a good job in daily testing, so as to avoid a series of mechanical failures in the operation process of the equipment, so as to improve its production efficiency, but also to ensure the personal safety of operators!

What is the reason for the uneven output of the feed pellet machine?

The feed pellet machine is currently the most widely used livestock feed manufacturing machine. Because the products it manufactures are easy to store, transport and feed, it is loved by the majority of farmers. However, the feed pellet machine sometimes occurs during use, such as the pellets containing more powder, the size of the pellets produced is not uniform, and the pelleting machinery does not discharge these common problems. Farmers or feed processing plants should understand some simple failure causes in the daily use of machinery, and be able to take corresponding measures to remedy them in time.

1. There is a problem with the blade and gear of the poultry feed production machine. The formation of feed pellets mainly relies on the rotation of the pellet machine gear to drive the blades to cut pellets. Once the gears or blades are eliminated, the size of the cut feed particles will be uneven.

2. There is a problem with the motor. The motor equipped with the poultry feed making machine is a motor that is compatible with its rated power. Once it is damaged in the working process or the working power is unstable, it will not be able to pelletize or the pelleting will be uneven.

3. Operational problems. Irregular operation of operators will also cause uneven pellets in cattle feed manufacturing plant. For example, the granulation powder contains a large amount of water, which prevents the feed pellets from being formed, or they are easy to crack when exposed to cold wind after forming. If this situation is encountered, the operator should calmly analyze, find out the cause, and make timely remedies. So as not to affect the pelleting output and cause corresponding economic losses.

How to solve the abnormal situation of the noodle machine

 In the wheat processing plant, we cannot do without the use of the beating machine, which is prone to some small problems in the long-term work. At this time, we need to have a new understanding of the failure of the beating machine. We can identify where the fault occurs at the first time, and what is the reason for the failure? How should we solve this problem? These problems are familiar with, so that we can face in the emergence of problems can be the first time to solve, to ensure the production time and efficiency of the face machine! ABC Machinery professional manufacturer of flour to talk about flour milling process machine abnormal conditions should be solved?

 

If there is an abnormal condition in the operation of the noodle machine, the power must be cut off first, and the fault can only be checked after the power is cut off, which is also a safety measure for maintenance personnel. If the machine does not operate after being powered on, the possible fault is: the power supply contact is bad or the plug is loose; Bad contact of power switch; Poor contact of microswitch; The thermal protector is out of order. Troubleshooting measures are: replace the connector or repair the power supply, check whether the switch is damaged, adjust the micro switch, replace the heat protector. After the motor does not turn, it will also produce vibration or slow speed. The fault situation is: the mechanical part is stuck; The centrifuge is not on. Too low voltage can also cause this situation, the way to remove the trouble is to clean up the foreign matter in the crushing tank, after starting the machine, idle for half a minute, then slowly feed and adjust the power supply voltage.

Correct understanding of all kinds of abnormalities, is the face machine users friends should pay attention to the problem! I hope you can use the maize flour machine in the process of smooth!

 

Cold pressing and hot pressing of screw oil press

Now customers will ask whether our crops need to be fried or not? In fact, it is the difference between cold pressing and hot pressing of crops. Some crops can be steamed and fried, some crops do not need to be fried, depending on the situation! The following is the difference between cold pressing and hot pressing:
The so-called hot pressing means that the peanuts are fried in a wok and then pressed with an small scale oil mill. Cold pressing means that the peanuts are pressed directly without being fried!

Hot pressing is to squeeze the seeds of oil crops after roasting, with special fragrance, darker color and higher yield. There is less residue in the product and it is easy to store. The cold-pressed seeds are not roasted, so the smell is poor, but the color is good. Cold pressing does not need to heat the oil, the oil yield is low, the crude oil is light in color, has less impurities, and can retain more nutrients in the oil. It is suitable for some small varieties of oils or high-grade health oils that are not suitable for heating. Hot pressing requires heating oil (steaming and frying), and the oil yield is high, which is currently a common method. Therefore, hot pressing and cold pressing do not matter whether it is good or bad, it just depends on the needs of customers, but some crops must be hot pressed, such as sesame and tea seeds; some crops must be cold pressed, such as oil sunflower (also melon seeds). Generally, it is hot pressed once and cold pressed twice. This way the oil output rate is relatively high! The specific need for hot pressing or cold pressing depends on the oil crops to be pressed and the habits of customers.
After deciding how to squeeze, you can select the corresponding type of peanut oil processing equipment.

ABC Machinery is a professional oil equipment manufacturer, providing oil presses, complete production lines, oil mill project, palm oil processing plant and other kinds of grease equipment.

Rear axle rod making machine

 

Brief introduction charcoal briquettes machine:

After the removal of shaft rod making machine is also known as the shaft after the charcoal machine, propeller design is unique, can be adjusted before and after the rod speed and density, whether it is shavings, bamboo or a variety of wooden chaff, propeller stirring can be automatically uniform blanking, equipped with 22 kilowatt motor, strong power yield is higher (when the production of 280-350 kg).

The performance characteristics of bagasse briquettes machine

ABC Machinery new high-speed rice husk briquette machine dismantling propeller repair, do not need to remove the molding cylinder and heater, the repair of the propeller directly from the middle of the belt pulley installation immediately boot direct production.

Remind: after disassembling after drawing, after adjusting, before disassembling these 3 kinds of models each have their merits, hope everybody chooses according to own demand.

Charcoal machine production of charcoal density, density, good flammability, can replace firewood and coal. This product is especially suitable for heating kang in autumn and winter in north China, heating greenhouses or making common life fuel.

9 common problems of charcoal rod making machine

 1. Transverse cracks on the rod. Excessive moisture in the raw material will easily cause transverse cracks on the rod.
2. Reasons for longitudinal cracks of the rod: a. The temperature is too high. b. The screw inclination is too large; c. The abrasive tool is damaged. Solutions for longitudinal cracks: a. Lower the temperature; b. Repair the inclination to be as perpendicular to the axis as possible; c. Replace or repair.
3. Reasons for too low rod density: a. The temperature is too high; b. The screw pressure is small. If the heating temperature is too high or too low, the forming sleeve is seriously worn, the propeller angle is not consistent, and the raw material has too much moisture. The solution to the density of the rod is too small: a. Cool down; b. Reduce the screw angle and increase the screw pressure.

4. The reason for the low density at the center of the rod or scattered sawdust: the diameter of the root of the propeller shaft tip needs to be repaired and thickened. Misalignment of the shaft tip can also cause the above problems, and it needs to be corrected at high temperature.
5. Back-gassing of the wood briquette machine: It is manifested in that gas is sprayed out from the discharge port during production, mainly due to insufficient material supply. It may also be due to excessive moisture in the raw materials and insufficient heating temperature.
6. The charcoal briquetting plant appears "stuffy": the raw materials are mixed with large and hard impurities. If the voltage is low or the heating temperature is too low, the raw material may not dry. The former needs to be shut down to remove impurities. The latter must continue to warm up to soften the raw materials, or re-dry.

7. Reasons for the charcoal briquette making machine to fire: a. The material is too moist; b. The stick is dead. Improper temperature control, excessive moisture in raw materials, abrasion of the propeller, improper shaft tip, clogged vents, too large or too small screw in the head of the propeller, serious sleeve wear, etc. In this case, compare the above reasons one by one, and make adjustments after finding out the reasons. The solution of the briquette machine for sale firing: a. Adjust the drying temperature and dry the material; b. See the solution to the dead eye of the stick.
 8. Reasons for bar bending: uneven heating and excessive moisture in raw materials. The solution to bar bending: increase the temperature.
 9. Reasons for the flower stick: a. The screw is not repaired; b. The mold is worn; c. The raw material is low in lignin. The solution of the flower stick: a. Reduce the screw thread angle and increase the screw pressure; b. Replace or repair; c. Mix the raw materials with heavier specific gravity, or replace the raw materials and wait for the raw materials to ferment for one to two months before using.