Recently, many customers who have bought spiral oil press say that the oil output of the soybean oil machine is not smooth in the operation. Today, our ABC Machinery oil press factory technical chief engineer to communicate with you: what are the reasons for the poor oil out of the screw press in oil mill business?
1. The oil seam of the pressing strip is blocked by oil residue and debris or the pressing strip is packed too tightly. We should remove the oil residue and check whether the strip is too tight. If the strip is too tight, it should be adjusted.
2. If there is oil storage in the hopper of the cooking oil making machine, we should stop feeding at this time, and then use the oil cake to slowly flush out the oil. After the oil rushes out, we can continue to operate; We can also stop the oil from the discharge port, reassemble the pressing chamber parts, after the adjustment is completed, and then start the press.
3. We should pay special attention to oil crops with high oil content. If the cake is too thin when pressing, the oil can not be discharged from the seam in time, so that it will be stored in the chamber and hopper. At this time, the operation should be carried out by pressing oil seeds with high oil content, and the cake should be thicker, or thinner.
Since the introduction of the rod making machine, it has undoubtedly had a great impact on the entire market. However, due to various reasons, there are still big problems. So where will the sawdust briquettes making machine develop in the future?
1: Nowadays, most rod making machines still need manual operation. Perhaps with the development of technology, I believe that there will be fully automatic rod making machines without manual operation soon. 2: The output of rod making machine has improved. At present, the highest output of rod making machine rarely exceeds 10T/H. If matched with the production line, it can produce dozens of tons per hour at most. Many customers who require large output need to order several the set of rod making machines (units) can meet the demand for seats, but this answer greatly increases the floor space and invisibly increases a large part of the production cost. The breakthrough in output is the only way for the future development of the sawdust briquette maker. 3: The function of the stick making machine is diversified. Simply put, it is a machine with multiple functions. Although the stick making machine can also suppress crops such as straw and peanut shells at present, the sawdust, etc. still need to be pressed by a special sawdust stick making machine. In the future, there will be a real multifunctional stick making machine, which will integrate the pressing functions of feed, organic fertilizer and biomass pellets, and truly realize one machine with multiple functions. 4: With the improvement of the degree of particle forming, the rods pressed by the current rod making machines on the market often have cracks, uneven surfaces, etc., and in severe cases, powders may even be pressed. These are still unavoidable according to the current technical level. But it is believed that the forming aspect of the biomass briquettes machine will be greatly improved in the future.
ABC Machinery specializes in the production of sawdust rod making machines and biomass rod making machines. For more products login: www.bioenergy-machine.com.
Some
clients, after a survey, decide on a large charcoal machine. This automatic
production line equipment must go to the regular factory, because there is no
production plan of the factory will be one-sided will make your production line
can not start production normally, spend a lot of money. So how to build a
large sawdust
briquettes machine production line?
Whether you are a small or large charcoal machine production line, there are
several joint processes, one is the drying of biological materials, the second
is the carbonization of raw materials. Therefore, in the whole charcoal
production process, the integration of a reasonable dryer and carbonization
furnace will be a powerful barrier to production. These all need to be built
according to the actual situation. But the large charcoal machine production
line all needs to construct the lumber mill, the raw material dryer, the
charcoal powder molding machine and the carbonization furnace and so on.
The daily output of large charcoal machine equipment is as high as 10 tons or
as high as dozens tons, which is important for large and medium-sized
enterprises. Large charcoal machine equipment production, investment is also
large, for large and medium-sized enterprises to bring high profits, deeply
large and medium-sized enterprises porridge. Investment in large charcoal
making machine investors should also consider the following points
can be invested:
1. Plant: To invest in large sawdust
briquette maker, first of all, to choose a large plant, ensure that
it can be safe production.
2. Raw materials: Whether there is enough raw materials to enable normal
production.
3. Capital: See if there is enough capital to keep the entire production line
running.
4. Environmental trend: It is necessary to understand the environmental trend
to see whether the carbon produced has a good environmental trend.
5. Workers: You need to find workers in advance, usually 8.
On June 5, 2018, Algerian customers came to visit our
company. Algerian customers come to our production base to deepen their
understanding of our company and products through actual visit and
investigation, so as to carry out further cooperation. Wood
pellet maker is the main part of wood pellet production line, wood
pellet extrusion into particles is the key step of the whole set of wood pellet
production line.
Subsequently, the customer visited each production workshop
of our company under the guidance of our manager, and our engineers explained
the production situation and process of our products to him. Through the
on-site inspection of our products, the Algerian customer highly recognized the
overall strength of our company. After the on-site and product inspection, the
two sides had a friendly negotiation. The foreign trade manager expressed his
sincere hope that both sides could reach a consensus on cooperation. The
manager also mentioned that our company relies on stable product quality, high
quality after-sales service two strong advantages, under the support of new and
old customers rapid growth, development, has been among the domestic brand, by
the majority of customers praise.
Henan ABC Machinery Co., Ltd. has a lot of customers in
Algeria, often Algerian customers to ABC Machinery to inspect the sawdust
pellet machine production line, the wood
pellet machine in the crusher system is very interested in, The wood
chip pulverizer is composed of the main engine, fan, saxron, dust removal system
and electric control system, which can pulverize the branches into wood chips
as particles. The successful docking with Algerian customers marks that our
company has taken another solid step in the development process of the testing
machine market in Algeria!
On June 5, 2018, Algerian customers came to
our company for inspection. Algerian customers come to our company's production
base, aiming to deepen their understanding of our company and products through
actual visits and inspections, so as to carry out further cooperation. The wood
pellet maker is the main part of the wood pellet production line.
Extruding wood pellets into pellets is the key step of the whole wood pellet
production line.
Subsequently, the customer visited our company’s production workshops under the
leadership of our company’s manager, and our company’s engineers explained the
production situation and process of the products to them.
Through on-site inspections of the company’s products, the Algerian customers
have a strong understanding of our company’s overall strength. Highly
recognized. After the site and product inspections, the two parties had a
friendly negotiation. The foreign trade manager expressed his sincere hope that
the two sides can reach a consensus on cooperation. The manager also mentioned
that, relying on the two strong advantages of stable product quality and
high-quality after-sales service, our company has grown and developed rapidly
with the support of new and old customers. It has now become a domestic brand
and has received unanimous praise from customers.
Henan ABC Machinery Co., Ltd. has many customers in Algeria. Algerian customers
often come to Henan ABC Machinery wood
pellet manufacturer to inspect the pelletizing
machine production line. They are very interested in the crusher
system in the wood pellet machine. The wood pellet crusher is hosted by the
crusher. , Fan, Shakron, dust removal system, electric control system,
pulverize branches, etc. into wood chips to make particles. The successful
docking with Algerian customers this time marks another solid step taken by our
company in the development process of Algeria's testing machine market!
At present, China's feed machinery industry
has a certain planning and level, feed machinery production enterprises have
developed to more than 900,000, during which more than 600 backbone
enterprises.
The primary layout of animal
feed manufacturing process
The main engine is composed of feeding, mixing, granulating, transmission and
smoothing system. The operational process is demand powder, water content is
not more than 15% of the cooperation from the hopper into the feeding ground
dragon, through regulate speed stepless speed regulation, obtain the suitable
material flow, and then into the blender, after mixing rod agitation mix with
steam conditioning, if need to increase the molasses or grease, can also be
from a homology with steam quality in the mixing barrel, The increase of grease
is usually not more than 3%, otherwise it is difficult to form, after quenching
and tempering, the temperature of the powder can reach 64 ~ 85 ℃, and
the humidity reaches 14 ~ L 6%.Then through the chute, with the iron suction equipment
to remove the iron impurities mixed in the powder guess, into the granulation
chamber for granulation. The primary advantages of feed machinery processing
feed:
1, can prevent animal picky eating. Cooperative feed formula has a variety of
materials, nutrients, can prevent the animal from choosing their favorite meal
from the powder. Because of the uniformity of granular feed in the process of
storage and transportation and feeding, feeding loss can be reduced by 8% to
10%.
2. High feed return rate. In the granulation process, because of the induction
of water, temperature and pressure, make the feed attack some physical and
chemical reaction, starch gelatinization, enzyme activity enhanced, can make
the feed more effectively digested by the feeding animals, into weight gain.
Feeding birds and pigs with pellet feed can increase feed conversion rate
(i.e., return rate) by 10-12% compared with powder feed. The average daily gain
of pigs was 4% and the ratio of feed to meat was 6%.Feed broiler, feed meat
ratio can be reduced by 3%-10%.
3. Storage and transportation are more economical. By pelleting, bulk density
of feed is usually increased by 40% to 100%, which can reduce storage capacity
and save shipping costs.
4, good liquidity, easy to manage. Many powders, especially those with low
specific weight, such as fluffy feed, molasses, or feed high in fat and urea,
often stick to the stock. Because pellets flow well and rarely appear to
adhere, they are popular on farms that use active feeders for programed dairy
or poultry farming.
5. Prevent active grading of feed ingredients and reduce environmental
pollution. In the process of powder storage and transportation because of the
volume and quality of different powder, it is easy to occur grading. Made of particles,
there is no classification of feed components, and particles are not easy to
dust, in the process of feeding particles to the air and water pollution is
much less than powder.
6. Kill salmonella in animal feed. Salmonella remains in the animal system
after ingestion, and humans who eat animals infected with the bacteria can get
salmonella gastroenteritis. The method of steam tempering and granulating can
kill salmonella in animal feed.
The first station where the material enters the flat die wood pellet maker is the feeding room. The feeding room plays the role of buffering and feeding materials, and completes the feeding of the materials to the wedge-shaped grab angle of the grinding roller. The feeding chamber has two characteristics. One is that the feeding space is wide, which provides space for the large-diameter press rollers that squeeze the biomass raw materials, and also provides the feeding space for the fluffy biomass raw materials; the second is the direct action of gravity. The feeding principle is efficient and practical.
Biomass materials such as sawdust, branches, shredded tree branches and straw powder have high crude fiber content, are light and fluffy, and are not easy to feed. The spacious feeding room, first of all, can provide a wide feeding space for the material. Secondly, it is allowed to be equipped with a large-diameter press roller, thereby increasing the grabbing angle and enhancing the grabbing ability for coarse fiber materials. According to calculations, the bulk density of the sawdust material is about 200kg/m3, the porosity is about 75%, the material itself is light and fluffy, and the compression ratio when it is made into pellets is above 6, which places higher requirements on the feeding space. The flat die sawdust pellet mill has a spacious feeding chamber. Take the flat die pelletizer machine as an example, its effective feed volume is about 120dm3, and a single feed can reach 24kg, which can fully meet the needs of the machine.
Secondly, the process of material feeding is a process of natural falling under the action of gravity. There is no need to force feeding, and the raw materials can directly fall to the station suitable for extrusion. This feeding method is obviously better than the ring die wood pellet machine. When the ring die machine is working, it is necessary to explore the corresponding guide plate parameters for different materials. If the material properties change slightly, the guide plate has to be changed, which limits. The adaptability of the ring die machine to raw materials is improved.
In today's resource-scarce society, in order to protect our planet, we must save resources while looking for new energy. In order to adapt to the development and needs of the times, the pellet feed produced by the straw poultry feed making machine has been welcomed by farmers. This is the important secret why the straw pellet machine can develop rapidly.
The rapid development of straw pellet machines mainly reflects two aspects:
1. The straw pellet machine uses stalk-type biomass straw pellets as a new type of biomass pellet fuel, which replaces coal for various purposes such as cooking, heating, and power generation. Compare biomass pellet fuel with mineral fuel this kind of biomass pellet fuel not only has low environmental pollution, but is also easy to obtain, cheap, and rich in resources. As long as there are green plants growing year after year, this resource will never be exhausted. 2. The straw cattle feed machine solves the influence of some external conditions, such as the straw itself is relatively light, relatively large, and easy to wind, rain, snow and fire when used. Moreover, the straw pellet machine produces forage grass and forage crop straws into forage pellets. , Forage grass has good palatability after maturation, long-term preservation and no deterioration, easy storage, so that the resources of forage grass production areas have a wider market, and it plays a more important role in protecting grasslands and developing captive animal husbandry.
The development prospects of straw pellet machines are very good. Facing the prospects of the current pellet fuel industry or feed aquaculture industry, the aquaculture industry will also go international in a few years, so there is a straw pellet opportunity to improve the quality of our lives. , It will improve the work efficiency of our aquaculture industry and at the same time let the straw feed making machine improve our work efficiency. The straw pellet machine is favored by more and more people due to its special advantages. From the above two points, we can see that the production of the straw pellet machine has provided a lot of convenience for our lives. Welcome to inquire and purchase, and look forward to cooperating with you!
Jilin City produces more than 5 million tons of crop stalks every year. In addition to burning wood and fodder, more than 3 million tons are left. Nowadays, these straws, which can only be thrown away in the past, have new uses.
In many towns and villages in Longtan District, 8 straw wood pellet plants have been built to use straw to produce molding fuels. The price of straw fuel is 10% lower than that of coal with the same calorific value. During the combustion process, the calorific value can reach 3,800 to 4,200 kcal, and during the combustion process, there is no emission of sulfur dioxide and some waste. After burning, its waste is very good potash fertilizer. The rice straw and rice husk are crushed and processed into carbon rods and carbon blocks to replace coal. So far, Jilin City has 10 straw briquettes processing enterprises, 45 production lines, and an annual processing capacity of 300,000 tons. Relevant departments of Jilin City stated that during the “Twelfth Five-Year Plan” period, they will also invest 870 million yuan to focus on the construction of 17 key projects including biomass briquette, straw biomass central heating transformation, and biomass power generation, and strive to complete the project. Later, it replaces 410,000 tons of standard coal every year.
ABC Machinery's sawdust pelletizer machine and wood pellet maker are both energy-saving and environmentally friendly. Our company guarantees product quality and will definitely provide you with the most satisfactory service!
According to the motion state of the executive parts, flat die animal feed making machine has three kinds of moving roller type, moving mode and die roller double moving type. The last two kinds are commonly used in small chicken feed making machine, while larger models generally use moving roller type. According to the shape of the grinding roller, it can be divided into two kinds: cone roller and straight roller. The working principle of straight-roll moving-roll poultry feed production machine is shown in Figure 1: the motor drives the spindle through the reducer, which drives the grinding roller, and the grinding roller revolves around the spindle and rotates around the grinding roller shaft. Biomass, when the particles are processed raw material is fed into flat die machine feeding chamber, under the common role of distributor and scraper evenly on the flat die, driven spindle roller continuous rolled material layer, squeezing material into the die, material in the die hole forming type, such as process, after a certain time in cylindrical form being squeezed out, rotating knife cutting the material, the formation of particles, The granules are sent out by the sweep plate.
Biomass raw materials mainly contain cellulose, hemicellulose, lignin and other substances, and the forming mechanism between the die rollers of the poultry feed making machine is as follows (see Figure 2) :Feeding zone of the material under the action of gravity is clingy on flat die, when the roller rolling forward, deformation of material into the compression zone, then by extrusion, raw materials entering the particles, the gap between the air gap is expelled, each other between the particle position constantly updated, all gradually larger gap between particles was dominated by particles that can get into. With roller continue rolling, by compaction of raw materials into the extrusion area, part of the wedge area, die cone hole part and the first half belong to extrusion area, within the area, the pressure continues to increase, the particle itself deformation and plastic flow occurs, the perpendicular to the direction of maximum principal stress is extended, and continue to pack around the smaller gap, Due to the friction between the roller and the material effect intensifies and produce a lot of calories, which can soften, raw materials containing lignin adhesive force increases, the softening of the joint action of cellulose in the lignin and biomass, biomass forming gradually, then part of the residual stress in storage within the forming block and combined with solid particles but not very stable. The forming block enters the mold retaining section of the die hole under the action of extrusion, in which the residual stress which is not conducive to shape keeping is eliminated and the particles are shaped.
The influence of the bearing on the feed pellet machine
When we use the feed pellet machine, we must be reasonable. The premonition of the feed pellet machine failure is the noise. The problem that often occurs in the feed pellet machine is that the bearing is damaged. We will obviously feel that the feed pellet machine itself has a big problem. Shaking or a lot of parts of itself have stopped rotating, these are all indicating that the bearing has a problem. This phenomenon is often caused by excessive operation, and running too fast can also cause this problem.
Today, with the rapid development of high and new technology, it is impossible for an animal feed business without innovative technology. To win a stable development, you must have a certain strength and endurance. At present, due to market demand, there are various types and forms of pellet machines. As a professional manufacturer of pellet machines, ABC Machinery constantly listens to the opinions and requirements of entrepreneurs. According to the current market situation, we can manufacture pellet machines that meet the market and can be loved by entrepreneurs. We can provide customers according to customer requirements. Build a pellet machine.
Corn processing equipment network briefly describes the development history of corn! Corn is indeed a kind of enduring food crop and economic crop. The scientific name of corn is maize, the common name is cob, corn, rice, etc., which belong to the grass family. Corn is one of the very ancient crops, and has been cultivated in my country for more than 470 years. My country’s corn is distributed in a wide area, from Hainan Island in the south, Heilongjiang in the north, Taiwan in the east, and Xinjiang in the west. The main production areas are concentrated in the northeast, north and southwest regions, forming a slope from northeast to southwest band. Corn has the characteristics of short growth period, high temperature tolerance, strong adaptability, high yield, and high economic value, and has received great attention from people. At present, corn occupies an important position in the entire human life and has become a major cereal suitable for humans and livestock as well as an important industrial raw material.
Corn is also a good food and economic crop last night, and it has played an indelible role in everyone's life and economy. Corn is an important raw material in flour mill business.Therefore, vigorously promote food crops and support maize flour milling process equipment is an indispensable item! ABC Machinery specializes in the production of maize milling machine, corn infiltration processing machinery, large, medium and small particle processing equipment. It attaches great importance to the training of management and technical personnel, and vigorously develops large-scale complete corn processing equipment, corn deep processing equipment and its supporting products with the domestic advanced level. The company pursues the marketing concept of "Quality First, Integrity First", and strives to give full play to its already formed advantages in corn processing technology, equipment quality, installation and commissioning and after-sales service, and strive to create value for customers, mutual benefit and win-win, more corn For detailed information of processing equipment, please log in to www.flourmillplant.com or email to info@abcmach.com for detailed consultation!
In animal feed business, the key equipment is feed pellet machine. Before debugging before biomass pellet machine to clean, cleared when installing leaving stone and slag inclusions and steam pipeline system used to check whether it has good functions of decompression and hydrophobic, to ensure that the required when the granulating dry saturated steam conditioning, and can guarantee the pressure reducing valve has 0.058 0.4 MPA steam. Before starting the feed pellet machine, the distance between the pressure roller and the ring mold must be adjusted. Generally, the pressure roller seems to rotate when the ring mold is rotated. It must not make the distance between the ring mold and the pressure roller too small, leading to direct friction. There is also the operation of poultry feed making machine should not make the feeding amount of the moment to reach the maximum, should be added a little material, while adding a little steam about 5-10 minutes to make the feeding amount to reach the ideal value.
ABC Machinery specializes in the production of wood pellet machines, cattle feed machine and bar making machines.
Flour machinery in the production of high-quality white flour in the wheat milling process of the need to experience a step, that is: in addition to impurity! Flour machinery to wheat reasonable in addition to the process to produce better flour, then flour machinery should be on the wheat how to correct and reasonable in addition to the impurity?
① In order to ensure the purity of the ground wheat, all kinds of impurities in the raw material should be removed, but the focus of the removal is all kinds of dust impurities, especially all kinds of inorganic impurities that have the greatest impact on the production and product purity.
(2) When arranging the sequence of impurity removal, it should be considered to remove the large dust impurities that are directly harmful to production first, and then remove other impurities that are mixed and adherent. The impurities that differ greatly from the wheat process characteristics are removed first, so that the kinds and quantities of impurities in the raw material are greatly reduced, and then the impurities that differ little from the wheat process characteristics are dealt with.
(3) For the impurities with more than two kinds of differences from wheat, simpler methods should be used as far as possible to remove. For example, the particle size of sand is obviously greater than or less than the wheat grain, the effect of screening is better than that of stone removing machine.
(4) The side-by-side impurities whose suspension speed is similar to that of large-grain wheat are the difficulties in removing impurity, such as side-by-side mud blocks with smaller particle size, etc., which need to be removed by selecting or integrating various methods.
The above four are the principle of flour machine to remove impurity of wheat. I hope you can learn to master certain skills carefully to use for yourself! ABC MACHINERY is a professional manufacturer of flour mill plant and wheat processing Machinery. Production and sales of flour mill, small flour machine, stone mill flour machine, flour mill, chemical mill, seasoning mill, grain cleaning machine, improve embellish wheat machine, wheat washing machine and other wheat processing machinery. The company has advanced flour machinery production equipment, improve the flour machinery quality management system! And all of our flour machinery and corn processing equipment to provide free on-site installation and debugging training operators and all the perfect pre-sale, sale, after-sales service!
The hydraulic pump is mainly used to
squeeze the oil, mainly for hot-squeezed oil. The oil yield rate of pressing
sesame oil is very high, and the pressed oil cake can be used again, which has
high oil utilization. And the operation is very convenient, equivalent to a
one-key start.
The body of the hydraulic mustard
oil mill is basically made of pure steel, and the interior is clean
and hygienic. There is no screw shaft and only the press chamber, which is easy
to clean and maintain. However, the squeezing range is smaller than that of the
screw oil press, and the squeezing effect is very good for the oil that needs
heat processing for small sesame and rapeseed particles. Oil press models are
generally differentiated according to the number of kilograms pressed, such as
8 kg and 16 kg models. It is also selected according to the user's pressing
needs.
Summary: Screw oil presses and hydraulic oil presses have different pressing
principles, so the effect of squeezing crops is also different. You can confirm
the pressed oil before purchasing and then select the cooking
oil machine.
Generally, the family makes wood carbon by burning trees to a certain extent, burying them in grass ash and soil, and using waste heat to hold the burned trees into wood carbon.
White carbon raw materials: white carbon mainly to hard broad-leaved wood in fagaceae, Elm trees as raw materials, due to the different trees can be divided into: Black white carbon (raw materials: black oak), green white carbon (raw materials: green oak), white carbon (raw materials: other oak, beech and other non-timber forest).Because of the national environmental policy, the industry has become less and less.
Black carbon raw materials: mainly soft broad-leaved firewood. As a result of the difference of tree species can be divided into: expensive tea ceremony charcoal, charcoal, bamboo charcoal and other cheap civil black charcoal. The tea ceremony charcoal and branch charcoal are mainly produced in the three northeastern provinces with rich forest resources. They take oak wood as raw material, and the firing process and selection are very exquisite.
Activated carbon: the use of charcoal zinc chloride, phosphoric acid, potassium sulfide and dolomite and other chemicals activation, rinse, dry, grinding and processing, its production process is more serious to water pollution, the country generally restricted production.
Mechanism carbon: wood chips as raw materials, the process is mainly the wood chips through the sawdust briquettes machine high temperature, high pressure molding, and then into the carbonization furnace carbonization. The whole production process does not need to add any additive, belongs to the environmental protection product category. There are two main shapes on the market: hexagonal center with space and square center with holes. Mechanism charcoal as a traditional charcoal (traditional charcoal: trees as raw materials, fired from, is a resource destruction industry has now been banned by the state) substitute products, it has a long burning time, high heat value, no smoke, no explosion, environmental protection and other advantages.
ABC Machinery make varies kind of biomass briquette machine like wood chip log making machine, sugarcane charcoal machine, leaf briquette maker. ABC Machinery briquette machine Manufacture strongly present to our new products every year and produce the value addition machines for charcoal industry.
With the continuous improvement of environmental protection requirements and local emphasis on green GDP, more and more places will ban coal and limit coal, and the market for wood pellets will also increase. Now it can be said that the market for wood pellets is very good, and the market is in a state of short supply.
Several popular places in China are Hebei, Jiangsu, and Guangdong. For example, Hebei Province is a place with serious pollution. The local government has issued a coal ban and can only transform and find other relatively clean fuels, generally natural gas and wood pellets. The foreign market is another expansive sky, and wood pellet fuel has been widely used abroad. Judging from the data we have obtained, the annual international market demand is also very large. However, the requirements for the quality of the particles are relatively high.
So the wood chip fuel market spring has arrived, and fierce competition has also come, so we should do it as soon as possible. Friends who plan to invest in wood pellet machine can follow the price dynamics at http://www.gcmec.com.
Currently, there are many manufacturers of charcoal making machine, each with different levels. There are many carbon plants all over the country. Some people who want to invest don't know much about it. How to make charcoal from sawdust? They want to know everywhere, but the effect is not very good. In order to operate a carbon plant, decision-makers first need to possess the following qualities:
1. Corporate business strategy decision-making capabilities and corporate management capabilities. 2, have the spirit of enduring hardship, perseverance, and not afraid of failure 3. The long-term supply of raw materials has a rich foundation, the cost of the products is indeed competitive, and the funds can be guaranteed and supported by many people.
If all three are established, this is a good decision maker, and he will basically succeed. At the same time, there is no need to worry about the surplus of the product. At present, the domestic market is very large. Various industries demand charcoal. The insurance coefficient of running a charcoal factory is higher than that of any other enterprise. But at the same time need to pay attention to the following points: 1. The raw materials must be very cheap. 2, the choice of wood chip log making machine is better. 3. Good choice of technology, especially thruster repair technology and carbonized high temperature carbon technology.
Pay attention to the above three conditions. While doing the maintenance work, you will basically get profit. Welcome new and old customers to buy.
