How to choose a cost-effective peanut sheller

 ABC Machinery is a manufacturer specializing in the production of soybean oil mill and its supporting equipment. As we all know, the peanut peeler is also an inseparable part of peanut oil. When customers purchase cooking oil machine, some will need to be equipped with a peanut peeler; In order to prevent customers from encountering scams when purchasing a peanut sheller separately, today I will tell you what functions a good peanut sheller should have, so that customers can use it as a reference when purchasing. Deceived.

The peanut shelling machine is a machine that removes the peanut shells and keeps the peanuts intact through a high-speed rotating body.
1. The hulling is clean and the productivity is high. For hulling machines with cleaning devices, higher cleanliness is also required.
2. Low loss rate and small broken rate. ③Simple structure, reliable use, convenient adjustment, low power consumption, certain versatility, can remove a variety of crops to improve the utilization rate of machinery.
2. Requirements for peanuts (skin fruit). Peanuts are suitable for dryness and wetness. If they are too dry, the breakage rate will be high, and if they are too wet, work efficiency will be affected. The peanuts (skins) stored in rural areas are generally dry. The following methods can be used to make them dry and wet.
3. Shelling in winter. Before shelling, spray about 10 kg of warm water on 50 kg of rind and cover with plastic film for about 10 hours, and then dry it in the sun for about 1 hour to start shelling. Use in other seasons. The plastic film covering time is about 6 hours, and the rest is the same.
4. Dried peanuts (skins) can be immersed in a large pool, immediately removed after soaking and covered with plastic film for about 1 day, and then dried in the sun, and begin to shell after drying and wet.

5. Requirements for voltage and choice of workplace. For a single-phase motor to work normally, the voltage must reach its rated voltage. In rural areas, there is generally only one transformer in a village, and households are scattered, and the wires and circuits used are not very standard, resulting in insufficient voltage for users far away from the transformer. Therefore, the workplace should choose a place closer to the transformer. ABC Machinery provides various grease equipment, such as: mustard oil extraction process machine, palm oil processing plant cost, vegetable oil making machine, etc.

How is the production efficiency of the biomass briquette plant affected?

When the production line of the sawdust briquette press is working, because multiple machines are produced at the same time, the feeding and discharging are automatically completed by the conveyor, which greatly reduces the human resources. As long as each rod making machine can be stably produced, it should not pursue the maximum output of a single machine. Let the machine run at full load, because the sugarcane bagasse charcoal machine is more sensitive to the moisture content of the material and the crushing particle size requirements under full load. If there is a certain difference from the normal requirements, the discharge molding will be unstable, resulting in manual labor. The adjustment increases the labor intensity of the control personnel, and the production of other machines will also be affected to a certain extent! Therefore, the load of each host machine in the straw briquetting plant should be controlled within the rated load, to avoid the occurrence of unstable machine production caused by full load or overload operation, in order to improve the production efficiency of the entire biomass briquette plant.

The mechanism charcoal equipment has certain requirements on the raw material itself and the moisture content of the raw material. The raw material has a high lignin content, and the carbon content of the produced charcoal is high. In addition, the rod making machine generally requires that the moisture of the raw material is between 5% and 12%. If the moisture is high, it needs to be dried first.

Machine charcoal equipment generally uses sawdust or rice husks as raw materials, neither of which needs to be crushed. Secondly, wood shavings, bamboo shavings, branches, wooden scraps, fruit shells, etc. are also good raw materials, but they need to be crushed first, and the requirements for the crusher are also relatively high.

Factors affecting the service life of straw pellet machine

ABC Machinery is mainly engaged in high-quality straw pellet machine, wood pellet plant and other equipment(rotary drum dryer, pellet packing machine). The wood pellet making machine is made of crop straw or sawdust as raw materials, and is pressed into cylindrical pellets by the straw pellet machine.

Factors affecting the life of gemco pellet mill
1. The moisture of the material is too low, the hardness of the processed object is high, and the power consumption during processing is large, which increases the production cost of the enterprise and reduces the service life of the straw pellet machine. If the moisture is too large, it is not easy to crush and increases the impact of the hammer The number of times, at the same time, heat is generated due to the friction of the material and the impact of the hammer, which evaporates the internal moisture of the processing object, the evaporated moisture and the crushed fine powder form a paste and block the sieve, which reduces the discharge of the crusher. The moisture of grains, corn, etc. is controlled below 14%.

2. A permanent magnet cylinder or iron remover can be installed at the feed inlet of the machine, so as not to affect the service life of the pressure wheel, mold and central shaft. The temperature of the straw particles during the extrusion process is as high as 50-85°C, and the pressure wheel is running it is under strong driving force during work, but lacks the necessary and effective dust protection device, so the bearings must be cleaned every 2-5 working days, and high temperature grease must be added. The main shaft of the commercial wood pellet mill every other month after cleaning and refueling, the gear box should be cleaned and maintained at intervals of half a year, and the screw tightening and replacement of the transmission part should be carried out at any time.

3. When the material pressing is about to end, mix a little wheat hull with edible oil and put it into the machine. After 1-2 minutes of pressing, the machine is shut down to fill the mold hole with oil so that it can be put into production next time. It also saves man-hours. After the straw pellet machine stops, loosen the pressure wheel adjustment screw and remove the residual material.

The above three factors are the main factors affecting the service life of the straw pellet machine. On the other hand, the use of straw pellet machine is gradually expanding.

The difference between small sawdust granulator and feed granulator

Small sawdust particles machine is a lot of use in more than a decade ago, at that time the main is to use a new type of animal feed mill, because at that time many do feed manufacturers need to feed and then crushed granules, on the one hand, convenient to store, on the other hand feed particles are small and convenient, is advantageous to the animal digestion and absorption, is very popular with breeding users. So at that time the feed pellet machine is very popular, the sale is very popular and thus spawned a large number of feed pellet machine manufacturers.

In recent years, with the promotion of low-carbon and environmental protection in China, more and more places have begun to give up traditional coal as the raw material for combustion, and use sawdust or straw particles as the raw material for new energy. The demand for sawdust particles is most prominent in large power plants. On current trends, supply still outstrips supply. Under this environment, the sale of small sawdust granulator also once popular, in order to have better income, there are many traditional pellet feed mill manufacturers, give up the basic line of responsibility, feed granulator sold to the user to suppress sawdust particles. However, sawdust particles are much lighter than feed particles, more difficult to press than feed particles, so the traditional poultry feed production process machine is very difficult to suppress sawdust particles, and because of the market needs of the pressure, high wear, the service life of the machine is also very short.

We also remind everyone here, when buying chicken feed production machine, must be clear about small sawdust granulator, or feed granulator. Avoid losing money. Choose Anyang GEMCO sawdust granulator, sawdust granulator, sawdust crusher is not wrong, both energy saving and environmental protection, our company guarantees the quality of production, will provide you with the most satisfactory service!

Increasing demand for biomass briquette plant has become inevitable

Nowadays, environmental problems have become more and more a topic of concern to society, and the greenhouse effect has become more and more serious. As a substitute for coal-fired materials, biomass briquette plant have been widely used at home and abroad. Our company has successfully developed its own environmentally friendly and energy-saving wood chip rod making machine through this environmentally friendly product. Friends from all walks of life are welcome to visit purchase.

Sawdust rod making machines and rice husk charcoal making machine are mainly aimed at waste wood chips and straws, and these two types of materials are also the most produced in China, and are most urgently needed to be treated, construction waste, domestic waste, furniture industry every moment A large amount of waste wood will be generated. If these waste wood are directly discarded, it will not only cause pollution to the environment, but also greatly waste renewable resources. There are also straws, which produce a lot of straws in autumn every year. In the past, the people directly burned the straws, which not only wastes resources, but also greatly pollutes the environment. The disposal of crop straws has also been a concern of the country and local governments. In this case, a machine capable of processing wood chips and straws and turning them into valuables is particularly important, and the importance of wood shavings briquette maker and straw making machines at this time is revealed.

Demand for sawdust rod making machines increases: As the price of grain increases, the discarded crops, sawdust and straw can be reprocessed using sawdust rod making machines and straw rod making machines, and the pellets can be sent directly Go to power plants, replace coal, and use as new energy. This greatly reduces costs and is recognized by more and more customers.

Best Roller Sawdust Particle Machine

Sawdust straw pellet machine is suitable for pressing hard-to-bond and shaped materials, such as branches, trunks, bark and other wood scraps; used in fuel plants, wood processing plants, fertilizer plants, chemical plants, feed plants, etc., it is a farmer. The most compact compression molding equipment with small investment, quick results and no risk.

Benefits of Best sawdust pellet mill:
1. Best gemco pellet mill does not need to add water or dry during the granulation process. After natural heating up to about 70 ℃, the internal ripening is deep, the surface is smooth, the hardness is high, the particle size is adjustable, and the pellet feed is processed. All kinds of additives can be added in the medium, the nutrition loss is very small, and it can kill pathogenic microorganisms and parasites, and ensure the quality of feed.
2. The best palatability of the pellet machine feed pellets gelatinize the starch in the mixed powder during the pressing process, so that the compressed feed pellets have a certain flavor, increase the palatability of the feed pellets, can stimulate The appetite of livestock and poultry makes them prefer to eat, and the protein is organized to enhance the enzyme activity, so that the beans and grains contained in the feed hinder the digestion and utilization of nutrients (such as anti-trypsin factor), these Both improve the digestibility of feed. It has been determined that feed pellets can increase feed intake by 10% -15%. Sterilize and reduce disease. During the compression process of feed pellets, a short period of high temperature as high as 70 ℃ -100 ℃ can kill part of parasite eggs and pathogenic microorganisms, so that the disease of rabbits is significantly reduced. Practice has proved that the diarrhea, stomatitis and anorexia of poultry and livestock fed with pellets are significantly reduced.

​​​​​​​GEMCO animal feed mill

GEMCO energy machinery factory is a professional manufacturer of animal feed mill. Since our company was founded in 2007, we have advanced technology and more than 9 years of manufacturing experience. We are committed to the research and development and production of small pellet feed machine, so as to provide more convenient and better services for the majority of breeding users.

GEMCO energy machinery manufacturer specializes in the production of small feed granulator, small scale feed mill is corn, soybean meal, straw, grass, rice husk and other crushing directly pressed particles of feed processing machinery. Feed pellet machine is widely used in large, medium and small aquaculture, grain feed processing plants, livestock farms, poultry farms, individual farmers and small and medium farms, farmers or large, medium and small feed processing plants.

USES of feed granulator produced by GEMCO small granulator manufacturer: poultry feed production process machine, small household granulator, small poultry granulator, fish feed granulator, rabbit feed granulator, pig feed granulator, straw feed granulator; According to the production can be divided into: straw granule machine, wheat bran feed granule machine, soybean meal feed granule machine, corn straw feed granule machine, sawdust straw granule machine. A variety of different feed pelletizing machines differ in appearance and mode of production from that of classification.